Metallized polypropylene film capacitor(dipped) CBB22 205J100V
P15mm L4mm
Features:
1. Excellent self-healing ability
2. Excellent temperature characteristic ability
3. Excellent flame resistance ability
4. Lower DF value and high insulation resistance
5. Low loss at high frequency
6. Small inherent temperature rise
7. Flame retardant epoxy resin powder coating (UL94/V-0)
▇ Specifications
| Climatic Category | 40/105/21 |
| Operating Temperation Range | -40 ℃ ～ 105℃ ( +85℃ to +105℃; decreasing factor 1.25% per ℃ for vR (dc)) |
| Ratde Voltage | DC 100V ,250V,400V,630V |
| Capacitance Range | 0.01µF～10 µF |
| Capacitance Tolerance | ±5% (J), ±10%(k) |
| Voltage Proot | 1.6UR (5s) |
| Dissipation Factor | ≤10x10-4 (1kHz, 20℃) |
| Insulation Resistance | ≥50000MΩ , CR≤0.33 µF ≥15000s, CR>0.33 µF (20℃ 100V 1min) |
① W: capacitor body width
② H: Capacitance height ③ T :Capacitance thickness ④ P:he distance between two CP lines ⑤ d: Diameter of CP line |  |
▇ Typical Applications
● Widely used in high frequency,DC ,AC and pulse circuits
● Providing optimun performance with small size in S-correction
circuits for colour TV
● Specially designed for S-correction circuits of large screen
monitor and colour TV
● Suitable for the situation where applies high frequency and high
current pulse
Company Information
Our factory is an expert manufacturer of Film Capacitor which
provides DC capacitors and AC capacitors. So far, our products have
obtained UL, ENEC, CB, CQC, safety approval and company
certification by ISO-9001:2008 quality assured firm.
We use efficient automatic equipment which ensures maximum
consistency in your OEM orders to produce each capacitor. With 12
years of industrial experience, Don't hesitate to contact us
If you have any question, we always supply competitive price and
good quality products.
The dielectric of polypropylene film capacitors is made of the
thermoplastic, non-polar, organic and partially crystalline polymer
material polypropylene (PP), trade name Treofan, belonging to the
polyolefin family. They are manufactured as metallized wound and
stacked versions, film/foil types. Polypropylene film is the most
commonly used dielectric film in industrial and power capacitor
types. The polypropylene film material absorbs less moisture than
mylar and is therefore also suitable for "naked" gather designs
without a fur coat. But the maximum temperature of 105 °C prevents
the use of PP film in SMD packaging.
The temperature and frequency dependence of electrical parameters
of polypropylene film capacitors is very low. Polypropylene film
capacitors have a linear negative temperature coefficient of
capacitance of ±2.5% over their temperature range. 1 Frequency
determination circuit, filter, oscillator circuit, audio circuit
and timer. They are also used to compensate induction coils in
precision filter applications, and high frequency applications.
In addition to the application class qualification of PP film
capacitors in the film/foil version, the standard IEC/EN 60384-13
specifies three "stability classes". These stability classes
specify tolerances for temperature coefficients and allowable
variations in capacity-defining tests. They are divided into
different temperature coefficient classes (α), with associated
tolerances and preferred values for the allowable change in
capacitance after mechanical, environmental (humidity) and lifetime
tests.
